CEMCOLIFT ELEVATOR SYSTEMS PERFORMANCE ENGINEERED SOLUTIONS TO MEET YOUR ELEVATOR NEEDS


Passenger Elevators
Download Cemcolift Hydraulic Elevators Brochure

Inside Area Chart

STANDARD IN-GROUND ADVANTAGES/DISADVANTAGES

Traditional design utilizing a single hydraulic jack, which is located under the platform and installed in the ground.

Advantages:
  • Available with low and high capacity elevators
  • Available with higher travels
  • Accommodates passenger or freight loading
  • Allows for front and rear openings
  • Minimal hoistway sizes required
  • Minimal pit and overhead required
  • Flexible rail bracket spacing
  • Typically the lowest material costs
  • Easiest installation
  • Two stage in-ground telescopic jacks available (reduces drilling depth)
Disadvantages:
  • Drilling of hole to accommodate jack required. Hole depth is typically travel plus 5 feet
  • Possible contamination of oil into ground (PVC recommended to prevent contamination)

Specifications
These specifications cover all products and will require editing to meet your project requirements.

Cemcolift can provide standard sizes (as shown in chart below) as well as Non-Standard or Custom sized elevators. Please contact us to design a Non-Standard or Custom sized elevator.


STANDARD IN-GROUND DRAWING DOWNLOADS

DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
IG1 2000 Front 70'-0'' 5'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
IG2 2000 Front & Rear 70'-0'' 5'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
IG3 2500 Front 70'-0'' 6'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
IG4 2500 Front & Rear 70'-0'' 6'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
IG5 2500 Front 70'-0'' 5'-0'' W x 5'-0'' D DWG/PDF DWG/PDF
IG6 2500 Front & Rear 70'-0'' 5'-0'' W x 5'-0'' D DWG/PDF DWG/PDF
IG7 3000 Front 70'-0'' 6'-8'' W x 4'-8'' D DWG/PDF DWG/PDF
IG8 3000 Front & Rear 70'-0'' 6'-8'' W x 4'-11'' D DWG/PDF DWG/PDF
IG9 3500 Front 70'-0'' 6'-8'' W x 5'-5'' D DWG/PDF DWG/PDF
IG10 3500 Front & Rear 70'-0'' 6'-8'' W x 5'-5'' D DWG/PDF DWG/PDF
IG11 3500 Front 70'-0'' 5'-4'' W x 7'-2'' D DWG/PDF DWG/PDF
IG12 3500 Front & Rear 70'-0'' 5'-4'' W x 7'-2'' D DWG/PDF DWG/PDF
IG13 4000 Front 70'-0'' 5'-8'' W x 7'-8'' D DWG/PDF DWG/PDF
IG14 4000 Front & Rear 70'-0'' 5'-8'' W x 7'-8'' D DWG/PDF DWG/PDF
IG15 4000 Front 70'-0'' 7'-8'' W x 5'-3'' D DWG/PDF DWG/PDF
IG16 4000 Front & Rear 70'-0'' 7'-8'' W x 5'-3'' D DWG/PDF DWG/PDF
IG17 4500 Front 70'-0'' 5'-8'' W x 8'-0'' D DWG/PDF DWG/PDF
IG18 4500 Front & Rear 70'-0'' 5'-8'' W x 8'-0'' D DWG/PDF DWG/PDF
IG19 5000 Front 70'-0'' 5'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
IG20 5000 Front & Rear 70'-0'' 5'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
IG21 6000 Front 70'-0'' 6'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
IG22 6000 Front & Rear 70'-0'' 6'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
IG23 7000 Front 70'-0'' 7'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
IG24 7000 Front & Rear 70'-0'' 7'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
IG25 8000 Front 70'-0'' 7'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
IG26 8000 Front & Rear 70'-0'' 7'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
IG27 8000 Front 70'-0'' 8'-0'' W x 9'-0'' D DWG/PDF DWG/PDF
IG28 8000 Front & Rear 70'-0'' 8'-0'' W x 9'-0'' D DWG/PDF DWG/PDF
IG29 9000 Front 70'-0'' 8'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
IG30 9000 Front & Rear 70'-0'' 8'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
IG31 10000 Front 70'-0'' 8'-0'' W x 11'-0'' D DWG/PDF DWG/PDF
IG32 10000 Front & Rear 70'-0'' 8'-0'' W x 11'-0'' D DWG/PDF DWG/PDF
IG33 12000 Front 70'-0'' 10'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
IG34 12000 Front & Rear 70'-0'' 10'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
IG35 15000 Front 70'-0'' 10'-4'' W x 12'-6'' D DWG/PDF DWG/PDF
IG36 15000 Front & Rear 70'-0'' 10'-4'' W x 12'-6'' D DWG/PDF DWG/PDF


Commercial | Residential/LULA | Hydraulic Jacks | Parts & Components
About Us | Contact Us

Cemcolift, Inc. • 2801 Township Line Road • Hatfield, PA 19440-0500
Toll Free: (800) 962-3626 • Phone: (215) 799-2900 • Fax: (215) 703-0343
Download Library