CEMCOLIFT ELEVATOR SYSTEMS PERFORMANCE ENGINEERED SOLUTIONS
TO MEET YOUR ELEVATOR NEEDS


Freight Elevators


Inside Area Chart


ASME A17.1 Freight Loading Class & Minimum Rating

Class A
General Freight Loading - 50 Lbs Per Sq. Ft. No item weighs more than 1/4 of rated capacity.
Class B
Motor Vehicle Loading - 30 Lbs Per Sq. Ft.
 
     
Class C1
Industrial Truck Loading - 50 Lbs Per Sq. Ft. Truck carried with load.
Class C2
Industrial Truck Loading - 50 Lbs Per Sq. Ft. Truck NOT carried with load and load onplatform does not exceed 150% of rated load during load/unload.
Class C3
Concentrated Loading - 50 Lbs Per Sq. Ft. No truck used and load exceeds 1/4 of rated capacity.


STANDARD FREIGHT IN-GROUND ADVANTAGES/DISADVANTAGES

Traditional design utilizing a single hydraulic jack, which is located under the platform and installed in the ground.

Advantages:
  • Available with low and high capacity elevators
  • Available with higher travels
  • Accommodates passenger or freight loading
  • Allows for front and rear openings
  • Minimal hoistway sizes required
  • Minimal pit and overhead required
  • Flexible rail bracket spacing
  • Typically the lowest material costs
  • Easiest installation
  • Two stage in-ground telescopic jacks available (reduces drilling depth)
Disadvantages:
  • Drilling of hole to accommodate jack required. Hole depth is typically travel plus 5 feet
  • Possible contamination of oil into ground (PVC recommended to prevent contamination)

Specifications
These specifications cover all products and will require editing to meet your project requirements.

Cemcolift can provide standard sizes (as shown in chart below) as well as Non-Standard or Custom sized elevators. Please contact us to design a Non-Standard or Custom sized elevator.


STANDARD FREIGHT IN-GROUND DRAWING DOWNLOADS

CLASS A & C LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO
INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FIG1 4000 Front 70'-0'' 6'-0'' W X 7'-5 1/2'' D DWG/PDF DWG/PDF
FIG2 4000 Front & Rear 70'-0'' 6'-0'' W X 7'-3'' D DWG/PDF DWG/PDF
FIG3 4000 Front 70'-0'' 6'-0'' W X 9'-5 1/2'' D DWG/PDF DWG/PDF
FIG4 4000 Front & Rear 70'-0'' 6'-0'' W X 9'-3'' D DWG/PDF DWG/PDF
FIG5 6000 Front 70'-0'' 6'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FIG6 6000 Front & Rear 70'-0'' 6'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FIG7 6000 Front 70'-0'' 6'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FIG8 6000 Front & Rear 70'-0'' 6'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FIG9 8000 Front 70'-0'' 8'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FIG10 8000 Front & Rear 70'-0'' 8'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FIG11 8000 Front 70'-0'' 8'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FIG12 8000 Front & Rear 70'-0'' 8'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FIG13 10000 Front 70'-0'' 8'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FIG14 10000 Front & Rear 70'-0'' 8'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
FIG15 10000 Front 70'-0'' 10'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FIG16 10000 Front & Rear 70'-0'' 10'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FIG17 12000 Front 70'-0'' 10'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FIG18 12000 Front & Rear 70'-0'' 10'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
FIG19 12000 Front 70'-0'' 12'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FIG20 12000 Front & Rear 70'-0'' 12'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
 
 
CLASS B LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO
INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FIG21 6000 Front 70'-0'' 8'-0'' W X 18'-9 1/2'' D DWG/PDF DWG/PDF
FIG22 6000 Front & Rear 70'-0'' 8'-0'' W X 18'-7'' D DWG/PDF DWG/PDF
FIG23 8000 Front 70'-0'' 8'-0'' W X 21'-9 1/2'' D DWG/PDF DWG/PDF
FIG24 8000 Front & Rear 70'-0'' 8'-0'' W X 21'-7'' D DWG/PDF DWG/PDF
FIG25 10000 Front 70'-0'' 10'-0'' W X 24'-9 1/2'' D DWG/PDF DWG/PDF
FIG26 10000 Front & Rear 70'-0'' 10'-0'' W X 24'-7'' D DWG/PDF DWG/PDF




Commercial | Residential/LULA | Hydraulic Jacks | Parts & Components
About Us | Contact Us

Cemcolift, Inc. • 2801 Township Line Road • Hatfield, PA 19440-0500
Toll Free: (800) 962-3626 • Phone: (215) 799-2900 • Fax: (215) 703-0343

Download Library