CEMCOLIFT ELEVATOR SYSTEMS PERFORMANCE ENGINEERED SOLUTIONS TO MEET YOUR ELEVATOR NEEDS


Freight Elevators


Inside Area Chart

ASME A17.1 Freight Loading Class & Minimum Rating

Class A
General Freight Loading - 50 Lbs Per Sq. Ft. No item weighs more than 1/4 of rated capacity.		 Class B
Motor Vehicle Loading - 30 Lbs Per Sq. Ft.		  
     
Class C1
Industrial Truck Loading - 50 Lbs Per Sq. Ft. Truck carried with load.		 Class C2
Industrial Truck Loading - 50 Lbs Per Sq. Ft. Truck NOT carried with load and load onplatform does not exceed 150% of rated load during load/unload.		 Class C3
Concentrated Loading - 50 Lbs Per Sq. Ft. No truck used and load exceeds 1/4 of rated capacity.


FREIGHT DUAL ROPE ADVANTAGES/DISADVANTAGES

Design utilizes wire ropes in conjunction with two hydraulic jacks to lift the elevator at a 1:2 ratio. For each foot the jacks rise, the elevator rises two feet.

Advantages:
  • Available with higher travels up to 80'-0"
  • Available with low and medium capacity elevators
  • Accommodates passenger or freight loading
  • Allows for front and rear openings
  • Jack hole is not required - Eliminates cost for drilling and reduces the risk of oil contamination
  • Oil requirements are minimized with the 1:2 ratio
  • Minimal overhead required
Disadvantages:
  • Requires a larger hoistway width due to the jacks and roping mounted on each side of the platform
  • Governor access door is required in overhead unless special governor is provided
  • Side opening not an option
  • Material costs are typically higher compared to an in-ground application
  • Installation time is greater than an in-ground application

Cemcolift can provide standard sizes (as shown in chart below) as well as Non-Standard or Custom sized elevators. Please contact us to design a Non-Standard or Custom sized elevator.


Specifications
These specifications cover all products and will require editing to meet your project requirements.

FREIGHT DUAL ROPE DRAWING DOWNLOADS

CLASS A LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FDR1 4000 Front 80'-0'' 6'-0'' W X 7'-5 1/2'' D DWG/PDF DWG/PDF
FDR2 4000 Front & Rear 80'-0'' 6'-0'' W X 7'-3'' D DWG/PDF DWG/PDF
FDR3 4000 Front 80'-0'' 6'-0'' W X 9'-5 1/2'' D DWG/PDF DWG/PDF
FDR4 4000 Front & Rear 80'-0'' 6'-0'' W X 9'-3'' D DWG/PDF DWG/PDF
FDR5 6000 Front 80'-0'' 6'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FDR6 6000 Front & Rear 80'-0'' 6'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDR7 6000 Front 80'-0'' 6'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDR8 6000 Front & Rear 80'-0'' 6'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDR9 8000 Front 80'-0'' 8'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FDR10 8000 Front & Rear 80'-0'' 8'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDR11 8000 Front 80'-0'' 8'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDR12 8000 Front & Rear 80'-0'' 8'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDR13 10000 Front 80'-0'' 8'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FDR14 10000 Front & Rear 80'-0'' 8'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
 
 
CLASS B LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FDR15 6000 Front 80'-0'' 8'-0'' W X 18'-9 1/2'' D DWG/PDF DWG/PDF
FDR16 6000 Front & Rear 80'-0'' 8'-0'' W X 18'-7'' D DWG/PDF DWG/PDF
 
 
CLASS C LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FDR6 6000 Front & Rear 80'-0'' 6'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDR7 6000 Front 80'-0'' 6'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDR8 6000 Front & Rear 80'-0'' 6'-0'' W X 13'-3'' D DWG/PDF DWG/PDF




Commercial | Residential/LULA | Hydraulic Jacks | Parts & Components
About Us | Contact Us

Cemcolift, Inc. • 2801 Township Line Road • Hatfield, PA 19440-0500
Toll Free: (800) 962-3626 • Phone: (215) 799-2900 • Fax: (215) 703-0343
Download Library