CEMCOLIFT ELEVATOR SYSTEMS PERFORMANCE ENGINEERED SOLUTIONS TO MEET YOUR ELEVATOR NEEDS


Freight Elevators


Inside Area Chart

ASME A17.1 Freight Loading Class & Minimum Rating

Class A
General Freight Loading - 50 Lbs Per Sq. Ft. No item weighs more than 1/4 of rated capacity.		 Class B
Motor Vehicle Loading - 30 Lbs Per Sq. Ft.		  
     
Class C1
Industrial Truck Loading - 50 Lbs Per Sq. Ft. Truck carried with load.		 Class C2
Industrial Truck Loading - 50 Lbs Per Sq. Ft. Truck NOT carried with load and load onplatform does not exceed 150% of rated load during load/unload.		 Class C3
Concentrated Loading - 50 Lbs Per Sq. Ft. No truck used and load exceeds 1/4 of rated capacity.


FREIGHT DUAL HOLELESS ADVANTAGES/DISADVANTAGES

Design utilizes two hydraulic jacks, which are located on each side of the platform and installed on the pit floor. Jacks can be single stage or two stage telescopic. Single stage jacks can accommodate approximately 12'-6" of travel. Two stage telescopic jacks can accommodate approximately 23'-0" of travel. Travel may dictate the pit and overhead.

Advantages:
  • Available with low and high capacity elevators
  • Accommodates passenger or freight loading
  • Allows for front and rear openings
  • Jack hole is not required - Eliminates cost for drilling and reduces the risk of oil contamination
Disadvantages:
  • May require a larger hoistway width due to the jacks mounted on each side of the platform
  • Additional pit and overhead may be required with higher travels
  • Side opening not an option
  • Material costs are typically higher compared to an in-ground application

Specifications
These specifications cover all products and will require editing to meet your project requirements.

Cemcolift can provide standard sizes (as shown in chart below) as well as Non-Standard or Custom sized elevators. Please contact us to design a Non-Standard or Custom sized elevator.


FREIGHT DUAL HOLELESS DRAWING DOWNLOADS

CLASS A LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FDH1 4000 Front 12'-6'' 6'-0'' W X 7'-5 1/2'' D DWG/PDF DWG/PDF
FDH2 4000 Front & Rear 12'-6'' 6'-0'' W X 7'-3'' D DWG/PDF DWG/PDF
FDH3 4000 Front 12'-6'' 6'-0'' W X 9'-5 1/2'' D DWG/PDF DWG/PDF
FDH4 4000 Front & Rear 12'-6'' 6'-0'' W X 9'-3'' D DWG/PDF DWG/PDF
FDH5 6000 Front 12'-6'' 6'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FDH6 6000 Front & Rear 12'-6'' 6'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDH7 6000 Front 12'-6'' 6'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDH8 6000 Front & Rear 12'-6'' 6'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDH9 8000 Front 12'-6'' 8'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FDH10 8000 Front & Rear 12'-6'' 8'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDH11 8000 Front 12'-6'' 8'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDH12 8000 Front & Rear 12'-6'' 8'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDH13 10000 Front 12'-6'' 8'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FDH14 10000 Front & Rear 12'-6'' 8'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
FDH15 10000 Front 12'-6'' 10'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDH16 10000 Front & Rear 12'-6'' 10'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDH17 12000 Front 12'-6'' 10'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FDH18 12000 Front & Rear 12'-6'' 10'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
FDH19 12000 Front 12'-6'' 12'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FDH20 12000 Front & Rear 12'-6'' 12'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
 
 
CLASS B LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FDH21 6000 Front 12'-6'' 8'-0'' W X 18'-9 1/2'' D DWG/PDF DWG/PDF
FDH22 6000 Front & Rear 12'-6'' 8'-0'' W X 18'-7'' D DWG/PDF DWG/PDF
FDH23 8000 Front 12'-6'' 8'-0'' W X 21'-9 1/2'' D DWG/PDF DWG/PDF
FDH24 8000 Front & Rear 12'-6'' 8'-0'' W X 21'-7'' D DWG/PDF DWG/PDF
FDH25 10000 Front 12'-6'' 10'-0'' W X 24'-9 1/2'' D DWG/PDF DWG/PDF
FDH26 10000 Front & Rear 12'-6'' 10'-0'' W X 24'-7'' D DWG/PDF DWG/PDF
 
 
CLASS C LOADING
DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
FDH27 6000 Front 12'-6'' 6'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FDH28 6000 Front & Rear 12'-6'' 6'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDH29 6000 Front 12'-6'' 6'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDH30 6000 Front & Rear 12'-6'' 6'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDH31 8000 Front 12'-6'' 8'-0'' W X 11'-5 1/2'' D DWG/PDF DWG/PDF
FDH32 8000 Front & Rear 12'-6'' 8'-0'' W X 11'-3'' D DWG/PDF DWG/PDF
FDH33 8000 Front 12'-6'' 8'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDH34 8000 Front & Rear 12'-6'' 8'-0'' W X 13'-3'' D DWG/PDF DWG/PDF
FDH35 10000 Front 12'-6'' 8'-0'' W X 15'-5 1/2'' D DWG/PDF DWG/PDF
FDH36 10000 Front & Rear 12'-6'' 8'-0'' W X 15'-3'' D DWG/PDF DWG/PDF
FDH37 10000 Front 12'-6'' 10'-0'' W X 13'-5 1/2'' D DWG/PDF DWG/PDF
FDH38 10000 Front & Rear 12'-6'' 10'-0'' W X 13'-3'' D DWG/PDF DWG/PDF




Commercial | Residential/LULA | Hydraulic Jacks | Parts & Components
About Us | Contact Us

Cemcolift, Inc. • 2801 Township Line Road • Hatfield, PA 19440-0500
Toll Free: (800) 962-3626 • Phone: (215) 799-2900 • Fax: (215) 703-0343
Download Library