CEMCOLIFT ELEVATOR SYSTEMS PERFORMANCE ENGINEERED SOLUTIONS TO MEET YOUR ELEVATOR NEEDS


Passenger Elevators
Download Cemcolift Hydraulic Elevators Brochure

Inside Area Chart

DUAL HOLELESS ADVANTAGES/DISADVANTAGES

Design utilizes two hydraulic jacks, which are located on each side of the platform and installed on the pit floor. Jacks can be single stage or two stage telescopic. Single stage jacks can accommodate approximately 12'-6" of travel. Two stage telescopic jacks can accommodate approximately 23'-0" of travel. Travel may dictate the pit and overhead.

Advantages:
  • Available with low and high capacity elevators
  • Accommodates passenger or freight loading
  • Allows for front and rear openings
  • Jack hole is not required - Eliminates cost for drilling and reduces the risk of oil contamination
Disadvantages:
  • May require a larger hoistway width due to the jacks mounted on each side of the platform
  • Additional pit and overhead may be required with higher travels
  • Side opening not an option
  • Material costs are typically higher compared to an in-ground application

Specifications
These specifications cover all products and will require editing to meet your project requirements.

Cemcolift can provide standard sizes (as shown in chart below) as well as Non-Standard or Custom sized elevators. Please contact us to design a Non-Standard or Custom sized elevator.


DUAL HOLELESS DRAWING DOWNLOADS

DWG # CAPACITY OPENINGS TRAVEL
UP TO		 INSIDE CAB PLAN VIEW DRAWING SECTION VIEW & MACHINE ROOM DRAWINGS
DH1 2000 Front 12'-6'' 5'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
DH2 2000 Front & Rear 12'-6'' 5'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
DH3 2500 Front 12'-6'' 6'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
DH4 2500 Front & Rear 12'-6'' 6'-8'' W x 4'-3'' D DWG/PDF DWG/PDF
DH5 2500 Front 12'-6'' 5'-0'' W x 5'-0'' D DWG/PDF DWG/PDF
DH6 2500 Front & Rear 12'-6'' 5'-0'' W x 5'-0'' D DWG/PDF DWG/PDF
DH7 3000 Front 12'-6'' 6'-8'' W x 4'-8'' D DWG/PDF DWG/PDF
DH8 3000 Front & Rear 12'-6'' 6'-8'' W x 4'-11'' D DWG/PDF DWG/PDF
DH9 3500 Front 12'-6'' 6'-8'' W x 5'-5'' D DWG/PDF DWG/PDF
DH10 3500 Front & Rear 12'-6'' 6'-8'' W x 5'-5'' D DWG/PDF DWG/PDF
DH11 3500 Front 12'-6'' 5'-4'' W x 7'-2'' D DWG/PDF DWG/PDF
DH12 3500 Front & Rear 12'-6'' 5'-4'' W x 7'-2'' D DWG/PDF DWG/PDF
DH13 4000 Front 12'-6'' 5'-8'' W x 7'-8'' D DWG/PDF DWG/PDF
DH14 4000 Front & Rear 12'-6'' 5'-8'' W x 7'-8'' D DWG/PDF DWG/PDF
DH15 4000 Front 12'-6'' 7'-8'' W x 5'-3'' D DWG/PDF DWG/PDF
DH16 4000 Front & Rear 12'-6'' 7'-8'' W x 5'-3'' D DWG/PDF DWG/PDF
DH17 4500 Front 12'-6'' 5'-8'' W x 8'-0'' D DWG/PDF DWG/PDF
DH18 4500 Front & Rear 12'-6'' 5'-8'' W x 8'-0'' D DWG/PDF DWG/PDF
DH19 5000 Front 12'-6'' 5'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
DH20 5000 Front & Rear 12'-6'' 5'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
DH21 6000 Front 12'-6'' 6'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
DH22 6000 Front & Rear 12'-6'' 6'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
DH23 7000 Front 12'-6'' 7'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
DH24 7000 Front & Rear 12'-6'' 7'-8'' W x 8'-6'' D DWG/PDF DWG/PDF
DH25 8000 Front 12'-6'' 7'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
DH26 8000 Front & Rear 12'-6'' 7'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
DH27 8000 Front 12'-6'' 8'-0'' W x 9'-0'' D DWG/PDF DWG/PDF
DH28 8000 Front & Rear 12'-6'' 8'-0'' W x 9'-0'' D DWG/PDF DWG/PDF
DH29 9000 Front 12'-6'' 8'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
DH30 9000 Front & Rear 12'-6'' 8'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
DH31 10000 Front 12'-6'' 8'-0'' W x 11'-0'' D DWG/PDF DWG/PDF
DH32 10000 Front & Rear 12'-6'' 8'-0'' W x 11'-0'' D DWG/PDF DWG/PDF
DH33 12000 Front 12'-6'' 10'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
DH34 12000 Front & Rear 12'-6'' 10'-0'' W x 10'-0'' D DWG/PDF DWG/PDF
DH35 15000 Front 12'-6'' 10'-4'' W x 12'-6'' D DWG/PDF DWG/PDF
DH36 15000 Front & Rear 12'-6'' 10'-4'' W x 12'-6'' D DWG/PDF DWG/PDF


Commercial | Residential/LULA | Hydraulic Jacks | Parts & Components
About Us | Contact Us

Cemcolift, Inc. • 2801 Township Line Road • Hatfield, PA 19440-0500
Toll Free: (800) 962-3626 • Phone: (215) 799-2900 • Fax: (215) 703-0343
Download Library