 |
CORNERPOST IN-GROUND ADVANTAGES/DISADVANTAGES
Design utilizing a single hydraulic jack, which is located under the platform and installed in the ground. The rails are located in opposite corners of the hoistway.
Advantages:
- Available with low and high capacity elevators
- Available with higher travels
- Accommodates passenger or freight loading
- Allows for front, rear, and side openings
- Allows for glass walls and minimal visible equipment
- Minimal hoistway sizes required
- Minimal pit and overhead required
- Flexible rail bracket spacing
- Two stage in-ground telescopic jacks available (reduces drilling depth)
Disadvantages:
- Drilling of hole to accommodate jack required. Hole depth is typically travel plus 5 feet
- Possible contamination of oil into ground (PVC recommended to prevent contamination)
These specifications cover all products and will require editing to meet your project requirements.
Cemcolift can provide standard sizes (as shown in chart below) as well as Non-Standard or Custom sized elevators. Please contact us to design a Non-Standard or Custom sized elevator. |
CORNERPOST IN-GROUND DRAWING DOWNLOADS
|
| DWG # |
CAPACITY |
OPENINGS |
TRAVEL
UP TO |
INSIDE CAB |
PLAN VIEW DRAWING |
SECTION VIEW & MACHINE ROOM DRAWINGS |
| CP1 |
2000 |
Front & Side |
70'-0'' |
5'-8'' W x 4'-3'' D |
DWG/PDF
|
DWG/PDF
|
| CP2 |
2500 |
Front & Side |
70'-0'' |
6'-8'' W x 4'-3'' D |
DWG/PDF
|
DWG/PDF
|
| CP3 |
2500 |
Front & Side |
70'-0'' |
5'-0'' W x 5'-4'' D |
DWG/PDF
|
DWG/PDF
|
| CP4 |
3000 |
Front & Side |
70'-0'' |
6'-8'' W x 4'-8'' D |
DWG/PDF
|
DWG/PDF
|
| CP5 |
3500 |
Front & Side |
70'-0'' |
7'-2'' W x 5'-5'' D |
DWG/PDF
|
DWG/PDF
|
| CP6 |
4000 |
Front & Side |
70'-0'' |
5'-8'' W x 7'-8'' D |
DWG/PDF
|
DWG/PDF
|
| CP7 |
4500 |
Front & Side |
70'-0'' |
5'-8'' W x 8'-0'' D |
DWG/PDF
|
DWG/PDF
|
| CP8 |
5000 |
Front & Side |
70'-0'' |
5'-8'' W x 8'-6'' D |
DWG/PDF
|
DWG/PDF
|
| CP9 |
6000 |
Front & Side |
70'-0'' |
6'-8'' W x 8'-6'' D |
DWG/PDF
|
DWG/PDF
|
| CP10 |
7000 |
Front & Side |
70'-0'' |
7'-8'' W x 8'-6'' D |
DWG/PDF
|
DWG/PDF
|
| CP11 |
8000 |
Front & Side |
70'-0'' |
7'-0'' W x 10'-0'' D |
DWG/PDF
|
DWG/PDF
|
| CP12 |
8000 |
Front & Side |
70'-0'' |
8'-0'' W x 9'-0'' D |
DWG/PDF
|
DWG/PDF
|
| CP13 |
9000 |
Front & Side |
70'-0'' |
8'-0'' W x 10'-0'' D |
DWG/PDF
|
DWG/PDF
|
| CP14 |
10000 |
Front & Side |
70'-0'' |
8'-0'' W x 11'-0'' D |
DWG/PDF
|
DWG/PDF
|
| CP15 |
12000 |
Front & Side |
70'-0'' |
10'-0'' W x 10'-0'' D |
DWG/PDF
|
DWG/PDF
|
| CP16 |
15000 |
Front & Side |
70'-0'' |
10'-0'' W x 12'-6'' D |
DWG/PDF
|
DWG/PDF
|
|
|
Hydraulic Equipment
